Aerial winches-braking

Hydraulic machine designed to operate either as a brake and a winch, fit to string one rope or conductor. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. In puller use, one close hydraulic circuit lets to vary continuously the speed in both directions. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• One pair of steel capstans lined with multi-grooved nylon sectors.
• Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
• Safety negative hydraulic brake.
• Front oscillating conductor-driver with nylon rollers.
• Back fix conductor-driver with nylon rollers.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Stabilisers, share and attachments for anchoring and for lifting the machine.
• Oil cooling system.
• Auxiliary hydraulic circuit for additional equipment (one reelstand or reel-winder).

Optional devices:

• 007 – Amortised axle, overrun braking system, drawbar and lights for towing on road (homologation excluded).
• 014 – Reel-winder arms fit for a 1400-mm-dia. reel (1 or 2).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for rope/conductor.
• 045.3 Manual clamp for rope/conductor.
• 069.2 Electronic device with USB port, to save the data of the pull.
• 069.5 Printer for the electronic recorder, with accessories.

Hydraulic machine designed to operate either as a brake and a winch, fit to string one rope or conductor. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• One pair of steel capstans lined with multi-grooved nylon sectors.
• Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
• Device to control low-force tensions (150-1000 daN), fit for OPGW.
• Freewheeling disconnection (neutral) of capstans.
• Safety negative hydraulic brake.
• Front oscillating conductor-driver with nylon rollers.
• Back fix conductor-driver with nylon rollers.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Stabilisers, share and attachments for anchoring the machine.
• Oil cooling system.
• Auxiliary hydraulic circuit for additional equipment (one reelstand or reel-winder).

Optional devices:

• 008 – Amortised axle, air braking system, drawbar and lights for towing on road (homologation excluded).
• 014 – Reel-winder arm fit for a 1400-mm-dia. reel.
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for rope/conductor.
• 045.3 Manual clamp for rope/conductor.
• 069.2 Electronic device with USB port, to save the data of the pull.
• 069.5 Printer for the electronic recorder, with accessories.

Hydraulic machine designed to operate either as a brake and a winch, fit to string one rope or conductor. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. In puller use, one close hydraulic circuit lets to vary continuously the speed in both directions. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• One pair of steel capstans lined with multi-grooved nylon sectors.
• Machine control panel equipped with electronic device operating as dynamometer, preselector of max pull force, metercounter and speedometer.
• Device to control low-force tensions (1-15 kN), fit for OPGW cables, with idle position.
• Safety negative hydraulic brake.
• Front oscillating conductor-driver with nylon rollers.
• Rigid axle, tires, hand brake and drawbar for towing at low speed in workplace.
• Stabilisers, share and attachments for anchoring the machine.
• Oil cooling system.
• Auxiliary hydraulic circuit for additional equipment (one reelstand or reel-winder).

Optional devices:

• 008 – Amortised axle, air braking system, drawbar and lights for towing on road (homologation excluded).
• 012 – Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
• 014 – Reel-winder arm fit for a 1400-mm-dia. reel.
• 037- Cable control with 10 m of cable.
• 038 – Radiocontrol.
• 045.2 Automatic clamp for the conductor.
• 045.3 Manual clamp for the conductor.
• 069.2 Electronic device with USB port, to save the data of the pull.
• 069.5 Printer with accessories, complete with case.
• 119 – Capstans with steel grooves chemically treated.

Hydraulic machine designed to operate either as a brake and a winch, fit to string one or two ropes or conductors. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• One pair of steel capstans lined with multi-grooved nylon sectors.
• Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
• Device to control low-force tensions (2-20 kN), fit for OPGW.
• Freewheeling disconnection (neutral) of capstans.
• Safety negative hydraulic brake.
• Front oscillating conductor-driver with nylon rollers for 2 cond.
• Back fix conductor-driver with nylon rollers for 2 cond.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Hydraulic controlled back stabilisers, share and attachments for anchoring the machine.
• Oil cooling system.
• Two auxiliary hydraulic circuits for additional equipment (1 or 2 reel-winders or reel-stands).

Optional devices:

• 008 – Amortised axle, air braking system, drawbar and lights for towing on road (homologation excluded).
• 012 – Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
• 014 – Reel-winder arm fit for a 1400-mm-dia. reel.
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 2 ropes/conductors.
• 045.3 Manual clamp for 2 ropes/conductors.
• 069.2 Electronic device with USB port, to save the data of the pull.
• 069.5 Printer for the electronic recorder, with accessories.
• 119 – Capstans with steel grooves chemically treated.

Hydraulic machine designed to operate either as a brake and a winch, fit to string one or two ropes or conductors. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. In puller use, one close hydraulic circuit lets to vary continuously the speed in both directions. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• One pair of steel capstans lined with multi-grooved nylon sectors.
• Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
• Device to control low-force tensions (2-20 kN), fit for OPGW.
• Freewheeling disconnection (neutral) of capstans.
• Safety negative hydraulic brake.
• Front oscillating conductor-driver with nylon rollers for 2 cond.
• Back fix conductor-driver with nylon rollers for 2 cond.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Hydraulic controlled back stabilisers, share and attachments for anchoring the machine.
• Oil cooling system.
• wo auxiliary hydraulic circuits for additional equipment (1 or 2 reel-winders or reel-stands).

Optional devices:

• 008 – Amortised axle, air braking system, drawbar and lights for towing on road (homologation excluded).
• 012 – Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
• 014 – Reel-winder arm fit for a 1400-mm-dia. reel.
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 2 ropes/conductors.
• 045.3 Manual clamp for 2 ropes/conductors.
• 069.2 Electronic device with USB port, to save the data of the pull.
• 069.5 Printer for the electronic recorder, with accessories.
• 119 – Capstans with steel grooves chemically treated.

Hydraulic machine designed to operate either as a brake and a winch, fit to string one or two ropes or conductors. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• One pair of steel capstans lined with multi-grooved nylon sectors (optional: steel-grooves, see opt.119).
• Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
• Device to control low-force tensions (3-25 kN), fit for OPGW cables, with idle position.
• Freewheeling disconnection (neutral) of capstans.
• Safety negative hydraulic brake.
• Back fix conductor-driver with nylon rollers for 2 cond.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Stabilisers, share and attachments for anchoring the machine.
• Oil cooling system.
• Two auxiliary hydraulic circuits for additional equipment (1 or 2 reel-winders or reel-stands).

Optional devices:

• 008 – Amortised axle, air braking system, drawbar and lights for towing on road (homologation excluded).
• 014 – Reel-winder arm fit for a 1400-mm-dia. reel.
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 2 ropes/conductors.
• 045.3 Manual clamp for 2 ropes/conductors.
• 069.2 Electronic device with USB port, to save the data of the pull.
• 069.5 Printer for the electronic recorder, with accessories.
• 119 – Capstans with steel grooves chemically treated.
• 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cablecontrol (20 m) for controlling the 2 machines.

Hydraulic machine designed to operate either as a brake and a winch, fit to string one or two ropes or conductors. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• One pair of steel capstans lined with multi-grooved nylon sectors (optional: steel-grooves, see opt.119).
• Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
• Device to control low-force tensions (3-25 kN), fit for OPGW cables, with idle position.
• Freewheeling disconnection (neutral) of capstans.
• Safety negative hydraulic brake.
• Back fix conductor-driver with nylon rollers for 2 cond.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Stabilisers, share and attachments for anchoring the machine.
• Oil cooling system.
• Two auxiliary hydraulic circuits for additional equipment (1 or 2 reel-winders or reel-stands).

Optional devices:

• 008 – Amortised axle, air braking system, drawbar and lights for towing on road (homologation excluded).
• 014 – Reel-winder arm fit for a 1400-mm-dia. reel.
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 2 ropes/conductors.
• 045.3 Manual clamp for 2 ropes/conductors.
• 069.2 Electronic device with USB port, to save the data of the pull.
• 069.5 Printer for the electronic recorder, with accessories.
• 119 – Capstans with steel grooves chemically treated.
• 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cablecontrol (20 m) for controlling the 2 machines.

Hydraulic machine designed to operate either as a brake and a winch, fit to string one or two ropes or conductors. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• One pair of steel capstans lined with multi-grooved nylon sectors (optional: steel-grooves, see opt.119).
• Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
• Device to control low-force tensions (3-25 kN), fit for OPGW cables, with idle position.
• Freewheeling disconnection (neutral) of capstans.
• Safety negative hydraulic brake.
• Back fix conductor-driver with nylon rollers for 2 cond.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Stabilisers, share and attachments for anchoring the machine.
• Oil cooling system.
• Two auxiliary hydraulic circuits for additional equipment (1 or 2 reel-winders or reel-stands).

Optional devices:

• 008 – Amortised axle, air braking system, drawbar and lights for towing on road (homologation excluded).
• 014 – Reel-winder arm fit for a 1400-mm-dia. reel.
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 2 ropes/conductors.
• 045.3 Manual clamp for 2 ropes/conductors.
• 069.2 Electronic device with USB port, to save the data of the pull.
• 069.5 Printer for the electronic recorder, with accessories.
• 119 – Capstans with steel grooves chemically treated.
• 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cablecontrol (20 m) for controlling the 2 machines.

Hydraulic machine designed to operate either as a brake and a winch, fit to string one or two ropes or conductors. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• One pair of steel capstans lined with multi-grooved nylon sectors (optional: steel-grooves, see opt.119).
• Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
• Device to control low-force tensions (3-25 kN), fit for OPGW cables, with idle position.
• Freewheeling disconnection (neutral) of capstans.
• Safety negative hydraulic brake.
• Back fix conductor-driver with nylon rollers for 2 cond.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Hydraulic stabilisers and share.
• Attachments for anchoring and lifting the machine.
• Oil cooling system.
• Two auxiliary hydraulic circuits for additional equipment (1 or 2 reelwinders or reel-stands).

Optional devices:

• 008 – Amortised axle, air braking system, drawbar and lights for towing on road (homologation excluded).
• 012 – Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
• 014 – Reel-winder arm fit for a 1400-mm-dia. reel.
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 2 ropes/conductors.
• 045.3 Manual clamp for 2 ropes/conductors.
• 069.2 Electronic device with USB port, to save the data of the pull.
• 069.5 Printer for the electronic recorder, with accessories.
• 119 – Capstans with steel grooves chemically treated.
• 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cable-control (20 m) for controlling the 2 machines.

Hydraulic machine designed to operate either as a brake and a winch, fit to string one or two ropes or conductors. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• One pair of steel capstans lined with multi-grooved nylon sectors (optional: steel-grooves, see opt.119).
• Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
• Device to control low-force tensions (3-25 kN), fit for OPGW cables, with idle position.
• Freewheeling disconnection (neutral) of capstans.
• Safety negative hydraulic brake.
• Back fix conductor-driver with nylon rollers for 2 cond.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Hydraulic stabilisers and share.
• Attachments for anchoring and lifting the machine.
• Oil cooling system.
• Two auxiliary hydraulic circuits for additional equipment (1 or 2 reelwinders or reel-stands).

Optional devices:

• 008 – Amortised axle, air braking system, drawbar and lights for towing on road (homologation excluded).
• 012 – Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
• 014 – Reel-winder arm fit for a 1400-mm-dia. reel.
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 2 ropes/conductors.
• 045.3 Manual clamp for 2 ropes/conductors.
• 069.2 Electronic device with USB port, to save the data of the pull.
• 069.5 Printer for the electronic recorder, with accessories.
• 119 – Capstans with steel grooves chemically treated.
• 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cable-control (20 m) for controlling the 2 machines.

Hydraulic machine designed to operate either as a brake and a winch, fit to string one or two ropes or conductors. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• One pair of steel capstans lined with multi-grooved nylon sectors (optional: steel-grooves, see opt.119).
• Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
• Device to control low-force tensions (3-25 kN), fit for OPGW cables, with idle position.
• Freewheeling disconnection (neutral) of capstans.
• Safety negative hydraulic brake.
• Back fix conductor-driver with nylon rollers for 2 cond.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Hydraulic stabilisers and share.
• Attachments for anchoring and lifting the machine.
• Oil cooling system.
• Two auxiliary hydraulic circuits for additional equipment (1 or 2 reelwinders or reel-stands).

Optional devices:

• 008 – Amortised axle, air braking system, drawbar and lights for towing on road (homologation excluded).
• 012 – Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
• 014 – Reel-winder arm fit for a 1400-mm-dia. reel.
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 2 ropes/conductors.
• 045.3 Manual clamp for 2 ropes/conductors.
• 069.2 Electronic device with USB port, to save the data of the pull.
• 069.5 Printer for the electronic recorder, with accessories.
• 119 – Capstans with steel grooves chemically treated.
• 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cable-control (20 m) for controlling the 2 machines.

Hydraulic machine designed to operate either as a brake and a winch, fit to string one or two ropes or conductors. Two hydraulic circuits let to tension at constant force even varying the speed of stringing. The two circuits can be used independently or simultaneously, with automatic partition of the forces. In puller use, 2 close hydraulic circuits let to vary in continuous the speed in both directions, allowing to use one of the hydraulic circuits or both coupled. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• Two pairs of steel capstans lined with multi-grooved nylon sectors.
• Machine control panel equipped with 2 electronic instruments that operate as dynamometer, preselector of max pull force, metercounter and speedometer.
• Device to control low-force tensions (3-25 kN), fit for OPGW cables, with idle position.
• Freewheeling disconnection (neutral) of capstans.
• Two safety negative hydraulic brakes.
• Back fix conductor-driver with nylon rollers for 2 cond.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Hydraulic-control stabilisers and share, and attachments to anchor the machine.
• Oil cooling system.
• Mechanism to synchronise the motion of the capstans.
• Two auxiliary hydraulic circuits for additional equipment.
• Fittings for earthing devices.

Optional devices:

• 005.1 Chassis with 2 dumped axles (tandem), air braking system and lights.
• 008 – Amortised axle, air braking system, drawbar and lights for towing on road (homologation excluded).
• 012 – Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
• 014 – Reel-winder arms fit for a 1400-mm-dia. reel (1 or 2).
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 2 ropes/conductors.
• 045.3 Manual clamp for 2 ropes/conductors.
• 069.2 Two electronic devices with USB port, to save the data of the pull (n.1 each circuit).
• 069.5 Printer for the electronic recorder, with accessories.
• 119 – Capstans with steel grooves chemically treated.
• 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cable-control (20 m) for controlling the 2 machines.

Hydraulic machine designed to operate either as a brake and a winch, fit to string one or two ropes or conductors. Two hydraulic circuits let to tension at constant force even varying the speed of stringing. The two circuits can be used independently or simultaneously, with automatic partition of the forces. In puller use, 2 close hydraulic circuits let to vary in continuous the speed in both directions, allowing to use one of the hydraulic circuits or both coupled. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• Two pairs of steel capstans lined with multi-grooved nylon sectors.
• Machine control panel equipped with 2 electronic instruments that operate as dynamometer, preselector of max pull force, metercounter and speedometer.
• Device to control low-force tensions (3-25 kN), fit for OPGW cables, with idle position.
• Freewheeling disconnection (neutral) of capstans.
• Two safety negative hydraulic brakes.
• Back fix conductor-driver with nylon rollers for 2 cond.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Hydraulic-control stabilisers and share, and attachments to anchor the machine.
• Oil cooling system.
• Mechanism to synchronise the motion of the capstans.
• Two auxiliary hydraulic circuits for additional equipment.
• Fittings for earthing devices.

Optional devices:

• 005.1 Chassis with 2 dumped axles (tandem), air braking system and lights.
• 008 – Amortised axle, air braking system, drawbar and lights for towing on road (homologation excluded).
• 012 – Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
• 014 – Reel-winder arms fit for a 1400-mm-dia. reel (1 or 2)
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 2 ropes/conductors.
• 045.3 Manual clamp for 2 ropes/conductors.
• 069.2 Two electronic devices with USB port, to save the data of the pull (n.1 each circuit).
• 069.5 Printer for the electronic recorder, with accessories.
• 119 – Capstans with steel grooves chemically treated.
• 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cable-control (20 m) for controlling the 2 machines.

Hydraulic machine designed to operate either as a brake and a winch, fit to string 1, 2, 3 or 4 ropes or conductors. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. In puller use, one close hydraulic circuit lets to vary continuously the speed in both directions. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed).

• One pair of steel capstans lined with multi-grooved nylon sectors (optional: steel-grooves, see opt.119).
• Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
• Safety negative hydraulic brake.
• Front oscillating conductor-driver with nylon rollers for 4 cond.
• Back fix conductor-drivers with nylon rollers for 4 cond.
• Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
• Stabilisers, share and attachments for anchoring the machine.
• Oil cooling system.
• Four auxiliary hydraulic circuits for additional equipment (reelwinders or reel-stands).

Optional devices:

• 005.4 Chassis with 2 rigid axles (tandem).
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 4 ropes/conductors.
• 045.3 Manual clamp for 4 ropes/conductors.
• 069.2 Electronic device with USB port, to save the data of the pull.
• 069.5 Printer for the electronic recorder, with accessories.
• 119 – Capstans with steel grooves chemically treated.
• 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cablecontrol (20 m) for controlling the 2 machines.

Hydraulic machine designed to operate either as a brake and a winch, fit to string 1, 2, 3 or 4 ropes or conductors. Two hydraulic circuits let to tension at constant force even varying the speed of stringing. The two circuits can be used independently or simultaneously, with automatic partition of the forces. In puller use, 2 close hydraulic circuits let to vary in continuous the speed in both directions, allowing to use one of the hydraulic circuits or both coupled.

• Two pairs of steel capstans lined with multi-grooved nylon sectors.
• Machine control panel equipped with 2 electronic instruments that operate as dynamometer, preselector of max pull force, metercounter and speedometer.
• Two safety negative hydraulic brakes.
• Front and back conductor-drivers with nylon rollers for 4 cond.
• Frame with two axles, steering-one with drawbar, leaf spring suspensions and tires, fits for towing on the road at 60 km/h (homologation excluded).
• Hydraulic back stabilisers and hydraulic share on front side.
• Oil cooling system.
• Mechanism to synchronise the motion of the capstans in tensioner use.
• Four auxiliary hydraulic circuits for additional equipment (i.e. motorised reel-stands).

Optional devices:

• 005.1 Chassis with 2 dumped axles (tandem), air braking system and lights.
• 006.3 Pneumatic braking plant with ABS.
• 012 – Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 4 ropes/conductors.
• 045.3 Manual clamp for 4 ropes/conductors.
• 069.2 Two electronic devices with USB port, to save the data of the pull (n.1 each circuit).
• 069.5 Printer for the electronic recorder, with accessories.
• 119 – Capstans with steel grooves chemically treated.
• 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cable-control (20 m) for controlling the 2 machines.

Hydraulic machine designed to operate either as a brake and a winch, fit to string 1, 2, 3 or 4 ropes or conductors. Two hydraulic circuits let to tension at constant force even varying the speed of stringing. The two circuits can be used independently or simultaneously, with automatic partition of the forces. In puller use, 2 close hydraulic circuits let to vary in continuous the speed in both directions, allowing to use one of the hydraulic circuits or both coupled. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed), on both the circuits.

• Two pairs of capstans with steel grooves lined thermally and chemically, high resistance, fit for steel wire ropes.
• Machine control panel equipped with 2 electronic instruments that operate as dynamometer, preselector of max pull force, metercounter and speedometer.
• Two safety negative hydraulic brakes.
• Front and back conductor-drivers with nylon rollers for 4 cond.
• Frame with two axles, steering-one with drawbar, leaf spring suspensions and tires, fits for towing on the road at 60 km/h (homologation excluded).
• Hydraulic-controlled back-stabilisers and share on pull side.
• Oil cooling system.
• Two auxiliary hydraulic circuits for additional equipment.

Optional devices:

• 005.1 Chassis with 2 dumped axles (tandem), air braking system and lights.
• 006.3 Pneumatic braking plant with ABS.
• 012 – Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 4 ropes/conductors.
• 045.3 Manual clamp for 4 ropes/conductors.
• 069.2 Two electronic devices with USB port, to save the data of the pull (n.1 each circuit).
• 069.5 Printer for the electronic recorder, with accessories.

Hydraulic machine designed to operate either as a brake and a winch, fit to string 1, 2, 3 or 4 ropes or conductors. Four hydraulic circuits let to tension at constant force even varying the speed of stringing. The four circuits can be used independently or simultaneously, with automatic partition of the forces. In puller use, the hydraulic circuits (close) let to vary in continuous the speed in both directions operating four control levers, allowing to use the circuits independently or simultaneously. The machine has a system that lets to maintain the pull force programmed by automatically adapting the speed in compliance with the load (even at null speed), on all the four circuits.

• Four pairs of capstans with steel grooves lined thermally and chemically, high resistance, fit for steel wire ropes or conductors.
• Machine control panel equipped with 4 electronic instruments that operate as dynamometer, preselector of max pull force, metercounter and speedometer.
• Four safety negative hydraulic brakes.
• Front and back conductor-drivers with nylon rollers for 4 cond.
• Frame with two axles, steering-one with drawbar, leaf spring suspensions and tires, fits for towing on the road at 60 km/h (homologation excluded).
• Hydraulic-controlled back-stabilisers and share on pull side.
• Oil cooling system.
• Four auxiliary hydraulic circuits for additional equipment (i.e. motorised reel-stands).

Optional devices:

• 006.3 Pneumatic braking plant with ABS.
• 012 – Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
• 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radiocontrol, max distance 50 m.
• 045.2 Automatic clamp for 4 ropes/conductors.
• 045.3 Manual clamp for 4 ropes/conductors.
• 069.2 Four electronic devices with USB port, to save the data of the pull (n.1 each circuit).
• 069.5 Printer for the electronic recorder, with accessories.