Lifting accessory designed for maintenance work in the unique setting of changing ropes on cranes or overhead hoists.
Used as a pair with a swivel to link the two cable grips, this model enables the changing of ropes on cranes or overhead hoists, that are subject to high mechanical stress : long rope lengths, demanding kinematics (multi-leg reeving, reverse bends etc….).
Due to its design, the TRSB2-EMRC absorbs the torsion generated by the torque in the wire ropes. The use of a long mesh enables good support between the cable grip and the rope during the work operation, especially where the kinematics are demanding.
The spliced eyes without thimbles can smoothly pass over the pulleys.
When using the TRSB2-EMRC model, the operator can change out ropes quickly and efficiently, whilst avoiding the risks that can jeopardize or delay maintenance work.
Compliant with the Directive 2006/42/EC on machinery .
Pour toutes informations complémentaires merci de bien vouloir nous contacter.
You will find all the specifications in the table below.
- Safe working load (SWL) => Factor of safety: 1:4.
- Load: Value corresponding to the weight (of the cable) between the ground (spool) and the first pass through high pulley of the kinematic.
|# cable||Ø cable|
Our technical department is available to provide any further information and to advise you on the product best adapted for your needs (breaking strength, dimensions, etc.). The above-mentioned dimensions are for reference only. Gattegno reserves the right to make changes at any time.
OUR CABLE GRIPS ARE NOT LIFTING ACCESSORIES.
Gattegno declines all responsibility in case of misuse.