Service winches

Hydraulic winch fit to pull one rope in service operations like setting-ups and adjustments of transmission lines and lay of underground cables. One close hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

• Detachable drum.
• Automatic swinging rope-winder with idle position for manual operation.
• Dynamometer for reading the pull force.
• Freewheeling of the drum.
• Safety hydraulic negative brake.
• Rigid axle with tires and drawbar fit for towing at low speed in workplace.
• Stabilisers and attachments for anchoring.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Rope-driver rollers fit for vertical and horizontal pull.

Optional devices:

• 003 – Axle with independent torsion bar suspensions and tires for towing on the road at 60 km/h, with mechanical parking brake.
• 026 – PVC cloth cover.
• 028.2 Diesel engine with rope starting.
• 034 – Engine electric starting with battery 12 V.
• 035 – Preselector of max pull force to stop the engine in case of overpull.
• 056.4 Service steel capstans beside the drum.
• 065 – Automatic clamp for rope on side capstan.
• 074.2 Steel rope, diam. 8 or 10 mm, length on demand.
• 090 – Monophase electric motor 220 V.
• 090.1 Three-phasic electric motor.

Hydraulic winch fit to pull one rope in service operations like setting-ups and adjustments of transmission lines and lay of underground cables. One close hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

• Drum equipped with neutral device for unwinding manually the rope while the engine is off.
• Automatic swinging rope-winder with idle position for manual operation.
• Machine control panel with dynamometer and preselector of max pull force.
• Safety hydraulic negative brake.
• Rigid axle with tires and drawbar fit for towing at low speed in workplace.
• Stabilisers and attachments for anchoring.
• Heat exchanger to cool the oil in the hydraulic circuit.
• Rope-driver rollers fit for vertical and horizontal pull.

Optional devices:

• 007 – Amortised axle, overrun brake and drawbar for towing on the road (homologation excluded).
• 026 – PVC cloth cover.
• 027 – Metallic coverage with doors.
• 037 – Remote control by cable, with 10 m of cable.
• 038 – Radio-control for remote control.
• 046.3 Rope-presser roller on the drum.
• 058 – Service winch with large-groove capstan (Ø 160 or 200 mm) fed by the hydraulic circuit of the puller. Max pulling force 500 kg.
• 064 – Device to control the load descent in case of diesel engine breakdown.
• 074.2 Steel rope.
• 090.1 Three-phasic electric motor.