Pulling Reinforced cable grip with spliced eyes without thimble

Lifting accessory designed for maintenance work in the unique setting of changing ropes on cranes or overhead hoists.

Used as a pair with a swivel to link the two cable grips, this model enables the changing of ropes on cranes or overhead hoists, that are subject to high mechanical stress : long rope lengths, demanding kinematics (multi-leg reeving, reverse bends etc....).

Due to its design, the TRSB2-EMRC absorbs the torsion generated by the torque in the wire ropes. The use of a long mesh enables good support between the cable grip and the rope during the work operation, especially where the kinematics are demanding.

The spliced eyes without thimbles can smoothly pass over the pulleys.

When using the TRSB2-EMRC model, the operator can change out ropes quickly and efficiently, whilst avoiding the risks that can jeopardize or delay maintenance work.

Conform to regulations of Directive 2006/42/EC on machinery.
Please contact us for further details.

You will find all the specifications in the table below.

• Safe working load (SWL) => Factor of safety: 1:4.
• Load: Value corresponding to the weight (of the cable) between the ground (spool) and the first pass through high pulley of the kinematic.