Hydraulic tensioners for stringing overhead conductors by Gattegno

Hydraulic brakes for stringing overhead conductors


Hydraulic brake OMAC – Mod. F104.15

Hydraulic brake fit to tension one conductor. One hydraulic circuit lets to tension at constant force even varying the speed of stringing.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with hydraulic dynamometer and mechanical metercounter.
  • Safety negative hydraulic brake.
  • Back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.

Optional devices:

  • 001.1 Freewheeling disconnection (neutral) of capstans.
  • 010 – Arrangement to use the machine as a puller (fed by a separated hydraulic power unit).
  • 026 – PVC cloth cover.
  • 045.3 Manual clamp for rope/conductor.
Hydraulic tensioner for overhead power lines intallation OMAC F104 15

Hydraulic brake OMAC – Mod. F75.20

Hydraulic brake fit to tension one conductor, specially fit for optical-fiber wires (OPGW). One hydraulic circuit lets to tension at constant force even varying the speed of stringing.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with hydraulic dynamometer and mechanical metercounter.
  • Device to control low-force tensions, specially fit for optical fibers.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.

Optional devices:

  • 010 – Arrangement to use the machine as a puller (fed by a separated hydraulic power unit).
  • 026 – PVC cloth cover.
  • 045.3 Manual clamp for rope/conductor
Hydraulic tensioner for overhead power lines intallation OMAC F75 20

Hydraulic brake OMAC – Mod. F120.25

Hydraulic brake fit to tension one conductor or fiber optic cable. One hydraulic circuit lets to tension at constant force even varying the speed of stringing.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with hydraulic dynamometer and mechanical metercounter.
  • Device to control low-force tensions (min. 1 kN), specially fit for optical fibers.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.

Optional devices:

  • 010 – Arrangement to use the machine as a puller (fed by a separated hydraulic power unit).
  • 024.1 Aluminium sectors with grooves, fit for tripolar cable ELICORD 80-mm dia.
  • 026 – PVC cloth cover.
  • 045.3 Manual clamp for rope/conductor.
Hydraulic tensioner for overhead power lines intallation OMAC F120 25

Hydraulic brake OMAC – Mod. F200.30

Hydraulic brake fit to tension one conductor or fiber optic cable. One hydraulic circuit lets to tension at constant force even varying the speed of stringing.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with hydraulic dynamometer and mechanical metercounter.
  • Device to control low-force tensions (1,5-15 kN), specially fit for optical fibers.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.

Optional devices:

  • 010 – Arrangement to use the machine as a puller (fed by a separated hydraulic power unit).
  • 026 – PVC cloth cover.
  • 045.3 Manual clamp for rope/conductor.
Hydraulic tensioner for overhead power lines intallation OMAC F200 30

Hydraulic brake OMAC – Mod. F120.30

Hydraulic brake fit to tension one conductor or fiber optic cable. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. Possibility to use the machine as a puller for recovering conductors.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Device to control low-force tensions (min. 1 kN), specially fit for optical fibers.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Auxiliary hydraulic circuit for controlling a reel-stand.

Optional devices:

  • 007 – Chassis with amortised axle, overrun brake and drawbar for towing on road (homologation excluded).
  • 024.1 Aluminium sectors with grooves, fit for tripolar cable ELICORD 80-mm dia.
  • 026 – PVC cloth cover.
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope/conductor.
  • 045.3 Manual clamp for rope/conductor.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer for the electronic recorder, with accessories.
Hydraulic tensioner for overhead power lines intallation OMAC F120 30

Hydraulic brake OMAC – Mod. F200.35

Hydraulic brake fit to tension one conductor or fiber optic cable. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. Possibility to use the machine as a puller for recovering conductors.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Device to control low-force tensions (1,5-20 kN), specially fit for optical fibers.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Auxiliary hydraulic circuit for controlling a reel-stand.

Optional devices:

  • 007 – Chassis with amortised axle, overrun brake and drawbar for towing on road (homologation excluded).
  • 026 – PVC cloth cover.
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope/conductor.
  • 045.3 Manual clamp for rope/conductor.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer for the electronic recorder, with accessories.
Hydraulic tensioner for overhead power lines intallation OMAC F200 35

Hydraulic brake OMAC – Mod. F200.40.2

Hydraulic brake fit to tension one or two conductors or optical fibre cables. One hydraulic circuit lets to tension at constant force even varying the speed of stringing.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with hydraulic dynamometer and mechanical metercounter.
  • Device to control low-force tensions (1,5-20 kN), specially fit for optical fibers.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Two back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.

Optional devices:

  • 010 – Arrangement to use the machine as a puller (fed by a separated hydraulic power unit).
  • 026 – PVC cloth cover.
  • 045.3 Manual clamp for 2 ropes/conductors.
Hydraulic tensioner for overhead power lines intallation OMAC F200 40 2

Hydraulic brake OMAC – Mod. F120.40.2

Hydraulic brake fit to tension one or two conductors or optical fibre cables. One hydraulic circuit lets to tension at constant force even varying the speed of stringing.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with hydraulic dynamometer and mechanical metercounter.
  • Device to control low-force tensions (2-20 kN), specially fit for optical fibers.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Two back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.

Optional devices:

  • 010 – Arrangement to use the machine as a puller (fed by a separated hydraulic power unit).
  • 026 – PVC cloth cover.
  • 045.3 Manual clamp for 2 ropes/conductors.
Hydraulic tensioner for overhead power lines intallation OMAC F120 40 2

Hydraulic brake OMAC – Mod. F200.45.2

Hydraulic brake fit to tension one or two conductors or optical fibre cables. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. Possibility to use the machine as a puller for recovering conductors.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Device to control low-force tensions (2-20 kN), specially fit for optical fibers.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Two back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Two auxiliary hydraulic circuits for controlling 1 or 2 reelstands.

Optional devices:

  • 008 – Amortised axle, air brake, drawbar and lights for towing on the road (homologation excluded).
  • 026 – PVC cloth cover.
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 2 ropes/conductors.
  • 045.3 Manual clamp for 2 ropes/conductors.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer for the electronic recorder, with accessories.
Hydraulic tensioner for overhead power lines intallation OMAC F200 45 2

Hydraulic brake OMAC – Mod. F120.45.2

Hydraulic brake fit to tension one or two conductors or optical fibre cables. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. Possibility to use the machine as a puller for recovering conductors.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Device to control low-force tensions (2-20 kN), specially fit for optical fibers.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Two back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Two auxiliary hydraulic circuits for controlling 1 or 2 reelstands.

Optional devices:

  • 008 – Amortised axle, air brake, drawbar and lights for towing on the road (homologation excluded).
  • 026 – PVC cloth cover.
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 2 ropes/conductors.
  • 045.3 Manual clamp for 2 ropes/conductors.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer for the electronic recorder, with accessories.
Hydraulic tensioner for overhead power lines intallation OMAC F120 45 2

Hydraulic brake OMAC – Mod. F200.70.2

Hydraulic brake fit to tension one or two conductors or optical fibre cables. One hydraulic circuit lets to tension at constant force even varying the speed of stringing.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with hydraulic dynamometer and mechanical metercounter.
  • Device to control low-force tensions (4-30 kN), specially fit for fibre-optic cables.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Two back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.

Optional devices:

  • 010 – Arrangement to use the machine as a puller (fed by a separated hydraulic power unit).
  • 026 – PVC cloth cover.
  • 045.3 Manual clamp for 2 ropes/conductors.
Hydraulic tensioner for overhead power lines intallation OMAC F200 70 2

Hydraulic brake OMAC – Mod. F120.70.2

Hydraulic brake fit to tension one or two conductors or optical fibre cables. One hydraulic circuit lets to tension at constant force even varying the speed of stringing.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with hydraulic dynamometer and mechanical metercounter.
  • Device to control low-force tensions (4-30 kN), specially fit for fibre-optic cables.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Two back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.

Optional devices:

  • 010 – Arrangement to use the machine as a puller (fed by a separated hydraulic power unit).
  • 026 – PVC cloth cover.
  • 045.3 Manual clamp for 2 ropes/conductors.
Hydraulic tensioner for overhead power lines intallation OMAC F120 70 2

Hydraulic brake OMAC – Mod. F200.75.2

Hydraulic brake fit to tension one or two conductors or optical fibre cables. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. Possibility to use the machine as a puller for recovering conductors.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Device to control low-force tensions (4-25 kN), specially fit for fibre-optic cables.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Two back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Two auxiliary hydraulic circuits for controlling 1 or 2 reelstands.

Optional devices:

  • 008 – Amortised axle, air brake, drawbar and lights for towing on the road (homologation excluded).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 2 ropes/conductors.
  • 045.3 Manual clamp for 2 ropes/conductors.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer for the electronic recorder, with accessories.
  • 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cablecontrol (20 m) for controlling the 2 machines.
Hydraulic tensioner for overhead power lines intallation OMAC F200 75 2

Hydraulic brake OMAC – Mod. F120.75.2

Hydraulic brake fit to tension one or two conductors or optical fibre cables. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. Possibility to use the machine as a puller for recovering conductors.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Device to control low-force tensions (4-30 kN), specially fit for fibre-optic cables.
  • Freewheeling disconnection (neutral) of capstans.
  • Safety negative hydraulic brake.
  • Two back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Two auxiliary hydraulic circuits for controlling 1 or 2 reel-stands.

Optional devices:

  • 008 – Amortised axle, air brake, drawbar and lights for towing on the road (homologation excluded).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 2 ropes/conductors.
  • 045.3 Manual clamp for 2 ropes/conductors.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer for the electronic recorder, with accessories.
  • 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cablecontrol (20 m) for controlling the 2 machines.
Hydraulic tensioner for overhead power lines intallation OMAC F120 75 2

Hydraulic brake OMAC – Mod. F120.100.22

Hydraulic brake fit to string one or two conductors. Two hydraulic circuits let to tension at constant force even varying the speed of stringing. The two circuits can be used independently or simultaneously, with automatic partition of the forces. The machine is equipped with an engine for pull-back operations. In pullingback usage, one hydraulic circuit lets to vary in continuous the speed in both directions, allowing to use one of the hydraulic circuits or both them matched.

  • Two pairs of steel capstans lined with multi-grooved nylon sectors, fit for 2 conductors totally.
  • Machine control panel equipped with 2 electronic instruments that operate as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Two safety negative hydraulic brakes.
  • Back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Hydraulic share, hydraulic back stabilisers and eyes for anchoring and for lifting the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Mechanism to synchronise the motion of the capstans.
  • Device with handle for coupling mechanically the 2 pairs of capstans.
  • Two auxiliary hydraulic circuits for controlling 1 or 2 reel-stands.

Optional devices:

  • 005.1 Chassis with 2 dumped axles (tandem), air braking system and lights.
  • 008 – Amortised axle, air brake, drawbar and lights for towing on the road (homologation excluded).
  • 012 – Predisposition of one hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
  • 017 – Hydraulic/mechanical device (n.1, on 1 circuit) to control low braking values (3-30 kN), fit to string fiber optics.
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 2 ropes/conductors.
  • 045.3 Manual clamp for 2 ropes/conductors.
  • 069.2 Two electronic devices with USB port, to save the data of the pull (n.1 each circuit).
  • 069.5 Printer for the electronic recorder, with accessories.
  • 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cable-control (20 m) for controlling the 2 machines.
Hydraulic tensioner for overhead power lines intallation OMAC F120 100 22

Hydraulic brake OMAC – Mod. F110.140.22

Hydraulic brake fit to string one or two conductors. Two hydraulic circuits let to tension at constant force even varying the speed of stringing. The two circuits can be used independently or simultaneously, with automatic partition of the forces. The machine is equipped with an engine for pull-back operations. In pulling-back usage, one hydraulic circuit lets to vary in continuous the speed in both directions, allowing to use one of the hydraulic circuits or both them matched.

  • Two pairs of steel capstans lined with multi-grooved nylon sectors, fit for 2 conductors totally.
  • Machine control panel equipped with 2 electronic instruments that operate as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Two safety negative hydraulic brakes.
  • Back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Hydraulic share, hydraulic back stabilisers and eyes for anchoring and for lifting the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Mechanism to synchronise the motion of the capstans.
  • Device with handle for coupling mechanically the 2 pairs of capstans.
  • Two auxiliary hydraulic circuits for controlling 1 or 2 reel-stands.

Optional devices:

  • 005.1 Chassis with 2 dumped axles (tandem), air braking system and lights.
  • 012 – Predisposition of one hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
  • 017 – Hydraulic/mechanical device (n.1, on 1 circuit) to control low braking values (4-40 kN), fit to string fiber optics.
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 2 ropes/conductors.
  • 045.3 Manual clamp for 2 ropes/conductors.
  • 069.2 Two electronic devices with USB port, to save the data of the pull (n.1 each circuit).
  • 069.5 Printer for the electronic recorder, with accessories.
  • 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cable-control (20 m) for controlling the 2 machines.
Hydraulic tensioner for overhead power lines intallation OMAC F110 140 2

Hydraulic brake OMAC – Mod. F120.120.3

Hydraulic brake fit to tension 1, 2 or 3 conductors. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. Possibility to use the machine as a puller for recovering conductors.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Safety negative hydraulic brake.
  • Three back fix conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Three auxiliary hydraulic circuits for controlling 1, 2 or 3 reelstands.

Optional devices:

  • 005.4 Chassis with 2 rigid axles (tandem).
  • 012 – Predisposition of one hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
  • 017 – Device to control low-force tensions, specially fit for fibre-optic cables.
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 3 ropes/conductors.
  • 045.3 Manual clamp for wire for 3 conductors.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer for the electronic recorder, with accessories.
  • 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cablecontrol (20 m) for controlling the 2 machines.
Hydraulic tensioner for overhead power lines intallation OMAC F120 120 3

Hydraulic brake OMAC – Mod. F120.135.33

Hydraulic brake fit to tension 1, 2 or 3 conductors. Three hydraulic circuits let to tension at constant force even varying the speed of stringing. The three circuits can be used independently or simultaneously, with automatic partition of the forces. The machine is equipped with an engine for pull-back operations. In pull-back usage, one hydraulic circuit lets to vary in continuously the speed in both directions, allowing to use one of the hydraulic circuits or all of them.

  • Three pairs of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with 3 electronic instruments that operate as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Three safety negative hydraulic brakes.
  • Front and back conductor-driver with nylon rollers.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Mechanism to synchronise the motion of the capstans.
  • Three auxiliary hydraulic circuits for controlling 1, 2 or 3 reelstands.

Optional devices:

  • 005.1 Chassis with 2 dumped axles (tandem), air braking system and lights.
  • 012 – Predisposition of one hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
  • 017 – Hydraulic/mechanical device (n.1, on 1 circuit) to control low braking values, fit to string fiber optics.
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 3 ropes/conductors.
  • 045.3 Manual clamp for wire for 3 conductors.
  • 069.2 Three electronic devices with USB port, to save the data of the pull (n.1 each circuit).
  • 069.5 Printer for the electronic recorder, with accessories.
Hydraulic tensioner for overhead power lines intallation OMAC F120 135 33

Hydraulic brake OMAC – Mod. F120.150.4

Hydraulic brake fit to tension 1, 2, 3 or 4 (up to 6 on demand) conductors. One hydraulic circuit lets to tension at constant force even varying the speed of stringing. Possibility to use the machine as a puller for recovering conductors.

  • One pair of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Safety negative hydraulic brake.
  • Back fix conductor-driver with nylon rollers for 4 cond.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Four auxiliary hydraulic circuits for controlling 1, 2, 3 or 4 reelstands.

Optional devices:

  • 005.4 Chassis with 2 rigid axles (tandem).
  • 012 – Predisposition of one hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
  • 017 – Device to control low-force tensions, specially fit for fibreoptic cables.
  • 020.3 Set of nylon sectors with grooves fit for 6 conductors Ømax 31,5 mm(instead of standard set), and 2 hydraulic circuits to control 2 additional reel-stands (total 6).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 4 ropes/conductors.
  • 045.3 Manual clamp for locking the conductor (for 3 and 4 conductors).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer for the electronic recorder, with accessories.
  • 174.2 Synchroniser device for matching 2 machines to tension more conductors simultaneously, complete with cablecontrol (20 m) for controlling the 2 machines.
Hydraulic tensioner for overhead power lines intallation OMAC F120 150 4

Hydraulic brake OMAC – Mod. F120.150.42

Hydraulic brake fit to tension 1, 2, 3 or 4 conductors. Two hydraulic circuits let to tension at constant force even varying the speed of stringing. The two circuits can be used independently or simultaneously, with automatic partition of the forces. The machine is equipped with an engine for pull-back operations. In pulling-back usage, one hydraulic circuit lets to vary in continuous the speed in both directions, allowing to use one of the hydraulic circuits or both them matched.

  • Two pairs of steel capstans lined with multi-grooved nylon sectors, fit for 2 conductors totally.
  • Machine control panel equipped with 2 electronic instruments that operate as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Two safety negative hydraulic brakes.
  • Front and back conductor-drivers with nylon rollers, for 4 cond.
  • Chassis with two rigid axles (tandem), tires and drawbar for towing at low speed in workplace.
  • Hydraulic share, hydraulic back stabilisers and eyes for anchoring and for lifting the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Mechanism to synchronise the motion of the capstans.
  • Four auxiliary hydraulic circuits for controlling 1, 2, 3 or 4 reelstands.

Optional devices:

  • 005.1 Chassis with 2 dumped axles (tandem), air braking system and lights.
  • 012 – Predisposition of one hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
  • 017 – Hydraulic/mechanical device (n.1, on 1 circuit) to control low braking values, fit to string fiber optics.
  • 020.3 Set of nylon sectors with grooves fit for 6 conductors (3+3).
  • 028.7 Device to start the diesel engine at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 4 ropes/conductors.
  • 045.3 Manual clamp for locking the conductor (for 3 and 4 conductors).
  • 069.2 Two electronic devices with USB port, to save the data of the pull (n.1 each circuit).
  • 069.5 Printer for the electronic recorder, with accessories.
Hydraulic tensioner for overhead power lines intallation OMAC F120 150 42

Hydraulic brake OMAC – Mod. F120.200.44

Hydraulic brake fit to tension 1, 2, 3 or 4 conductors. Four hydraulic circuits let to tension at constant force even varying the speed of stringing. The 4 circuits can be used independently or simultaneously, with automatic partition of the forces. The machine is equipped with an engine for pull-back operations. In pull-back usage, one hydraulic circuit lets to vary in continuously the speed in both directions, allowing to use one of the hydraulic circuits per time.

  • Four pairs of steel capstans lined with multi-grooved nylon sectors.
  • Machine control panel equipped with 4 electronic instruments that operate as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Four safety negative hydraulic brakes.
  • Front and back conductor-drivers with nylon rollers, for 4 cond.
  • Chassis with two rigid axles (tandem), tires and drawbar for towing at low speed in workplace.
  • Stabilisers, share and attachments for anchoring the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Mechanism to synchronise the motion of the capstans.
  • Four auxiliary hydraulic circuits for controlling 1, 2, 3 or 4 reelstands.

Optional devices:

  • 005.1 Chassis with 2 dumped axles (tandem), air braking system and lights.
  • 012 – Predisposition of one hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
  • 017 – Hydraulic/mechanical device (n.1, on 1 circuit) to control low braking values, fit to string fiber optics.
  • 028.7 Device to start the diesel engine at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 4 ropes/conductors.
  • 045.3 Manual clamp for locking the conductor (for 3 and 4 conductors).
  • 069.2 Four electronic devices with USB port, to save the data of the pull (n.1 each circuit).
  • 069.5 Printer for the electronic recorder, with accessories.
Hydraulic tensioner for overhead power lines intallation OMAC F120 200 44

Hydraulic brake OMAC – Mod. F120.240.62

Hydraulic brake fit to string 1, 2, 3, 4 or 6 conductors. Two hydraulic circuits let to tension at constant force even varying the speed of stringing. The two circuits can be used independently or simultaneously, with automatic partition of the forces. The machine is equipped with an engine for doing pull-back operations. In pulling-back usage, one hydraulic circuit lets to vary in continuous the speed in both directions, allowing to use one of the hydraulic circuits or both coupled.

  • Two pairs of steel capstans lined with multi-grooved nylon sectors, fit for 2 conductors totally.
  • Machine control panel equipped with 2 electronic instruments that operate as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Two safety negative hydraulic brakes.
  • Front and back conductor-drivers with nylon rollers, for 6 cond.
  • Chassis with two rigid axles (tandem), tires and drawbar for towing at low speed in workplace.
  • Hydraulic share, hydraulic back stabilisers and eyes for anchoring and for lifting the machine.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Mechanism to synchronise the motion of the capstans.
  • Six auxiliary hydraulic circuits for controlling up to 6 reelstands.

Optional devices:

  • 005.1 Chassis with 2 dumped axles (tandem), air braking system and lights.
  • 012 – Predisposition of one hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
  • 028.7 Device to start the diesel engine at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 6 ropes/conductors.
  • 069.2 Two electronic devices with USB port, to save the data of the pull (n.1 each circuit).
  • 069.5 Printer for the electronic recorder, with accessories.
Hydraulic tensioner for overhead power lines intallation OMAC F120 240 62