Hydraulic pullers for stringing overhead conductors

Hydraulic pullers for stringing overhead conductors


Hydraulic puller OMAC – Mod. F265.P.15

Hydraulic puller fit to pull one rope in laying underground transmission cables and fibre optics wires. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.
  • Machine control panel with control instruments.
  • Dynamometer and preselector of max pull force.
  • Mechanical metercounter.
  • Safety negative hydraulic brake.
  • Demountable axle with tires and drawbar for towing at low speed in workplace.
  • Mechanical stabilisers on pull side and jack-arm with wheel on drawbar side.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 003 – Damped axle for towing on road, with mechanical brake (homologation excluded).
  • 027 – Metallic coverage with doors.
  • 028.3 Air cooled diesel engine (it adds 50 kg to the machine weight).
  • 067 – Telescopic rod to lay underground cables (art. F277).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.3 Arrangement for electronic instrument opt. 069.2.
  • 069.5 Printer with accessories.
  • 074.2 Steel rope.
Pulling winch for aerial cable OMAC puller F265 P15

Hydraulic puller OMAC – Mod. F380.20

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Dynamometer and preselector of max pull force.
  • Mechanical metercounter.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers and attachments for anchorage.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for reels dia. 1100 mm, with automatic ropewinder.

Optional devices:

  • 007 – Chassis with amortised axle, overrun brake and drawbar for towing on road (homologation excluded).
  • 026 – PVC cloth cover.
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.3 Manual clamp for rope.
  • 067 – Telescopic rod to lay underground cables (art. F277).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 083.1 Rope transmission pulley, 360° revolving, fits for pulling underground cables, predisposed to receive the telescopic bar mod. F 276 and F 279.
Pulling winch for aerial cable OMAC puller F380 20

Mod. F275.30

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Dynamometer and preselector of max pull force.
  • Mechanical metercounter.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Hand-operated mechanical stabilisers
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 007 – Chassis with amortised axle, overrun brake and drawbar for towing on road (homologation excluded).
  • 026 – PVC cloth cover.
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.3 Manual clamp for rope.
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067 – Telescopic rod to lay underground cables (art. F277).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 083.1 Rope transmission pulley, 360° revolving, fits for pulling underground cables, predisposed to receive the telescopic bar mod. F 276 and F 279.
Pulling winch for aerial cable OMAC puller F275 30

Mod. F280.35

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Dynamometer and preselector of max pull force
  • Mechanical metercounter.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Hand-operated mechanical stabilisers
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 007 – Chassis with amortised axle, overrun brake and drawbar for towing on road (homologation excluded).
  • 026 – PVC cloth cover.
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope.
  • 045.3 Manual clamp for rope.
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067 – Telescopic rod to lay underground cables (art. F277).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 083.1 Rope transmission pulley, 360° revolving, fits for pulling underground cables, predisposed to receive the telescopic bar mod. F 276 and F 279.
Pulling winch for aerial cable OMAC puller F280 35

Mod. F230.45

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back stabilisers and manual front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 007 – Chassis with amortised axle, overrun brake and drawbar for towing on road (homologation excluded).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope.
  • 045.3 Manual clamp for rope.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 083.1 Rope transmission pulley, 360° revolving, fits for pulling underground cables, predisposed to receive the telescopic bar mod. F 276 and F 279.
Pulling winch for aerial cable OMAC puller  F230 45

Mod. F230.70

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Dynamometer and preselector of max pull force
  • Metercounter and speedometer.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back stabilisers and manual front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 007 – Chassis with amortised axle, overrun brake and drawbar for towing on road (homologation excluded).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope.
  • 045.3 Manual clamp for rope.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 083.1 Rope transmission pulley, 360° revolving, fits for pulling underground cables, predisposed to receive the telescopic bar mod. F 276 and F 279.
Pulling winch for aerial cable OMAC puller F230 70

Mod. F235.90

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Device for setting the pull force, that adjust the speed in order to maintain the force set.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back stabilisers and manual front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder

Optional devices:

  • 008 – Axle with leaf spring suspensions, drawbar, pneumatic braking system, tires and lights for towing on the road (without homologation).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope.
  • 045.3 Manual clamp for rope.
  • 047 – Hydraulic front stabilisers.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 084 – Bigger reelwinder fit for a 1900-mm-dia reel.
  • 115 – Setting-up for pulling 2 ropes contemporary.
  • 014 – Second reel-winder, ideal to complete the opt. 115.
Pulling winch for aerial cable OMAC puller F235 90

Mod. F260.120

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Dynamometer and preselector of max pull force
  • Metercounter and speedometer.
  • Device for setting the pull force, that adjust the speed in order to maintain the force set.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back stabilisers and manual front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 008 – Axle with leaf spring suspensions, drawbar, pneumatic braking system, tires and lights for towing on the road (without homologation).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope.
  • 045.3 Manual clamp for rope.
  • 047 – Hydraulic front stabilisers.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 084 – Bigger reelwinder fit for a 1900-mm-dia reel.
  • 115 – Setting-up for pulling 2 ropes contemporary.
  • 014 – Second reel-winder, ideal to complete the opt. 115.
Pulling winch for aerial cable OMAC puller F260 120

Mod. F260.140

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Dynamometer and preselector of max pull force
  • Metercounter and speedometer.
  • Device for setting the pull force, that adjust the speed in order to maintain the force set.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back stabilisers and manual front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 008 – Axle with leaf spring suspensions, drawbar, pneumatic braking system, tires and lights for towing on the road (without homologation).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope.
  • 045.3 Manual clamp for rope.
  • 047 – Hydraulic front stabilisers.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 084 – Bigger reelwinder fit for a 1900-mm-dia reel.
  • 115 – Setting-up for pulling 2 ropes contemporary.
  • 014 – Second reel-winder, ideal to complete the opt. 115.
  • 174.1 Synchroniser device for matching 2 machines to pull 2 ropes simultaneously, complete with cable-control (20 m) for controlling the 2 machines.
Pulling winch for aerial cable OMAC puller F260 140

Mod. F105.160

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device. Device for pull programming that brings on the fixed value adjusting automatically the velocity in agree with the loads on the line (even at ‘0’ speed).

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Device for setting the pull force, that adjust the speed in order to maintain the force set.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back and front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 008 – Axle with leaf spring suspensions, drawbar, pneumatic braking system, tires and lights for towing on the road (without homologation).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope.
  • 045.3 Manual clamp for rope.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 084 – Bigger reelwinder fit for a 1900-mm-dia reel.
  • 115 – Setting-up for pulling 2 ropes contemporary.
  • 014 – Second reel-winder, ideal to complete the opt. 115.
  • 174.1 Synchroniser device for matching 2 machines to pull 2 ropes simultaneously, complete with cable-control (20 m) for controlling the 2 machines.
Pulling winch for aerial cable OMAC puller F105 160

Mod. F105.180

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device. Device for pull programming that brings on the fixed value adjusting automatically the velocity in agree with the loads on the line (even at ‘0’ speed).

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Device for setting the pull force, that adjust the speed in order to maintain the force set.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back and front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1900-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 005.1 Chassis with tandem axle, drawbar, suspensions, air braking system, tires and lights for towing on the road (homologation excluded).
  • 008 – Axle with leaf spring suspensions, drawbar, pneumatic braking system, tires and lights for towing on the road (without homologation).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope.
  • 045.3 Manual clamp for rope.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 084 – Bigger reelwinder fit for a 2250-mm-dia reel.
  • 115 – Setting-up for pulling 2 ropes contemporary.
  • 014 – Second reel-winder, ideal to complete the opt. 115.
  • 174.1 Synchroniser device for matching 2 machines to pull 2 ropes simultaneously, complete with cable-control (20 m) for controlling the 2 machines.
Pulling winch for aerial cable OMAC puller F105 180

Mod. F250.240

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device. Device for pull programming that brings on the fixed value adjusting automatically the velocity in agree with the loads on the line (even at ‘0’ speed).

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Device for setting the pull force, that adjust the speed in order to maintain the force set.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back and front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1900-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 005.1 Chassis with tandem axle, drawbar, suspensions, air braking system, tires and lights for towing on the road (homologation excluded).
  • 008 – Axle with leaf spring suspensions, drawbar, pneumatic braking system, tires and lights for towing on the road (without homologation).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope.
  • 045.3 Manual clamp for rope.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 084 – Bigger reelwinder fit for a 2250-mm-dia reel.
  • 115 – Setting-up for pulling 2 ropes contemporary.
  • 014 – Second reel-winder, ideal to complete the opt. 115.
Pulling winch for aerial cable OMAC puller F250 240

Mod. F250.280

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device. Device for pull programming that brings on the fixed value adjusting automatically the velocity in agree with the loads on the line (even at ‘0’ speed).

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Device for setting the pull force, that adjust the speed in order to maintain the force set.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back and front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1900-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 005.1 Chassis with tandem axle, drawbar, suspensions, air braking system, tires and lights for towing on the road (homologation excluded).
  • 008 – Axle with leaf spring suspensions, drawbar, pneumatic braking system, tires and lights for towing on the road (without homologation).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope.
  • 045.3 Manual clamp for rope.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 084 – Bigger reelwinder fit for a 2250-mm-dia reel.
  • 115 – Setting-up for pulling 2 ropes contemporary.
  • 014 – Second reel-winder, ideal to complete the opt. 115.
Pulling winch for aerial cable OMAC puller F250 280

Mod. F250.360

Hydraulic puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device. Device for pull programming that brings on the fixed value adjusting automatically the velocity in agree with the loads on the line (even at ‘0’ speed).

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic instrument that operates as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Device for setting the pull force, that adjust the speed in order to maintain the force set.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back and front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1900-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 005.1 Chassis with tandem axle, drawbar, suspensions, air braking system, tires and lights for towing on the road (homologation excluded).
  • 008 – Axle with leaf spring suspensions, drawbar, pneumatic braking system, tires and lights for towing on the road (without homologation).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for rope.
  • 045.3 Manual clamp for rope.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories, complete with case.
  • 084 – Bigger reelwinder fit for a 2250-mm-dia reel.
  • 115 – Setting-up for pulling 2 ropes contemporary.
  • 014 – Second reel-winder, ideal to complete the opt. 115.
Pulling winch for aerial cable OMAC puller F250 360

Mod. F260.80.22

Hydraulic puller fit to pull one or two ropes in stringing operations of overhead transmission lines. Two hydraulic circuits lets to vary continuously the speed in both directions by operating two independent control devices. The two circuits may also be matched and operated together by one only control device.

  • Two pairs of multigrooved steel capstans fit for stringing two steel ropes.
  • Machine control panel with control instruments.
  • Two electronic digital instruments operating as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Two devices for setting the pull force that adjust the velocity in order to maintain the force set.
  • Two safety negative hydraulic brakes.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back stabilisers and manual front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Mechanism to synchronise the motion of the capstans, fit to obtain the max force of 8000 daN stringing one rope.
  • Two reelwinders fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 008 – Axle with leaf spring suspensions, drawbar, pneumatic braking system, tires and lights for towing on the road (without homologation).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 2 ropes.
  • 045.3 Manual clamp for 2 ropes.
  • 069.2 Electronic device with USB port and printer, to save and print the data of the pull.
  • 069.5 Printer with accessories, complete with case.
Pulling winch for aerial cable OMAC puller F260 80 22

Mod. F105.150.22

Hydraulic puller fit to pull one or two ropes in stringing operations of overhead transmission lines. Two hydraulic circuits lets to vary continuously the speed in both directions by operating two independent control devices. The two circuits may also be matched and operated together by one only control device.

  • Two pairs of multigrooved steel capstans fit for stringing two steel ropes.
  • Machine control panel with control instruments.
  • Two electronic digital instruments operating as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Two devices for setting the pull force that adjust the velocity in order to maintain the force set.
  • Two safety negative hydraulic brakes.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back and front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Mechanism to synchronise the motion of the capstans, fit to obtain the max force of 16000 daN stringing one rope.
  • Two reelwinders fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 005.1 Chassis with tandem axle, drawbar, suspensions, air braking system, tires and lights for towing on the road (homologation excluded).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 2 ropes.
  • 045.3 Manual clamp for 2 ropes.
  • 069.2 Electronic device with USB port and printer, to save and print the data of the pull.
  • 069.5 Printer with accessories, complete with case.
Pulling winch for aerial cable OMAC puller F105 150 22

Mod. F105.180.22

Hydraulic puller fit to pull one or two ropes in stringing operations of overhead transmission lines. Two hydraulic circuits lets to vary continuously the speed in both directions by operating two independent control devices. The two circuits may also be matched and operated together by one only control device.

  • Two pairs of multigrooved steel capstans fit for stringing two steel ropes.
  • Machine control panel with control instruments.
  • Two electronic digital instruments operating as dynamometer, preselector of max pull force, metercounter and speedometer.
  • Two devices for setting the pull force that adjust the velocity in order to maintain the force set.
  • Two safety negative hydraulic brakes.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
  • Hydraulic back and front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Mechanism to synchronise the motion of the capstans, fit to obtain the max force of 16000 daN stringing one rope.
  • Two reelwinders fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 005.1 Chassis with tandem axle, drawbar, suspensions, air braking system, tires and lights for towing on the road (homologation excluded).
  • 026 – PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 – Remote control by cable, with 10 m of cable.
  • 038 – Radio-control (max distance 50 m).
  • 045.2 Automatic clamp for 2 ropes.
  • 045.3 Manual clamp for 2 ropes.
  • 069.2 Electronic device with USB port and printer, to save and print the data of the pull.
  • 069.5 Printer with accessories, complete with case.
Pulling winch for aerial cable OMAC puller F105 180 22