Hydraulic pullers

Hydraulic pullers - Gattegno

A range of hydraulic pullers for laying underground cable :

Hydraulic puller - OMAC - Mod. F325.P.08

Mod. F325.P.08

Hydraulic puller fit to pull one rope in laying underground transmission cables and fibre optics wires. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.
  • Machine control panel with control instruments.
  • Dynamometer and preselector of max pull force
  • Safety negative hydraulic brake.
  • Axle with tires and drawbar for towing at workplace.
  • Mechanical stabilisers on pull side and jack-arm with wheel on drawbar side.
  • Attachments for anchorage and for lifting.
  • Rope driver rollers on pull side.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 027 - Metallic coverage with doors.
  • 028.3 Air cooled diesel engine with electric starting and battery 12 V.
  • 034 - Electric starting of the engine with battery 12 V.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.3 Arrangement for electronic instrument opt. 069.2.
  • 069.5 Printer with accessories.
  • 090 - Monophase electric motor 220 V.
  • 090.1 Three-phase electric motor 220/380 V.

 

 

Hydraulic puller - OMAC - Mod. F265.P.15

Mod. F265.P.15

Hydraulic puller fit to pull one rope in laying underground transmission cables and fibre optics wires. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.
  • Machine control panel with control instruments.
  • Dynamometer and preselector of max pull force
  • Mechanical metercounter.
  • Safety negative hydraulic brake.
  • Demountable axle with tires and drawbar for towing at low speed in workplace.
  • Mechanical stabilisers on pull side and jack-arm with wheel on drawbar side.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 003 - Damped axle for towing on road, with mechanical brake (homologation excluded).
  • 027 - Metallic coverage with doors.
  • 028.3 Air cooled diesel engine (it adds 50 kg to the machine weight).
  • 067 - Telescopic rod to lay underground cables (art. F277).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.3 Arrangement for electronic instrument opt. 069.2.
  • 069.5 Printer with accessories.

 

 

Hydraulic puller - OMAC - Mod. F215.P.30

Mod. F215.P.30

Hydraulic puller fit to pull one rope in laying underground transmission cables and fibre optics wires. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with dumped axle, tires, overrun brake, manual brake and drawbar for towing in the yard. Metallic coverage with doors.
  • Mechanical stabilisers on pull side and jack-arm with wheel on drawbar side.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 006.4 Arrangement of the chassis for circulation on road (homologation excluded).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067 - Telescopic rod to lay underground cables (art. F277).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 074.2 Steel rope.

 

 

Hydraulic puller - OMAC - Mod. F275.P.40

Mod. F275.P.40

Hydraulic puller fit to pull one rope in laying underground transmission cables and fibre optics wires. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with dumped axle, tires, overrun brake, manual brake and drawbar for towing in the yard.
  • Metallic coverage with doors.
  • Mechanical stabilisers on pull side and jack-arm with wheel on drawbar side.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 006.4 Arrangement of the chassis for circulation on road (homologation excluded).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067 - Telescopic rod to lay underground cables (art. F277).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 074.2 Steel rope.
  • 082 - Device for setting the pull force, which allows to maintain the force set even at speed '0' (fit for pipe refurbishing).

 

 

Hydraulic puller - OMAC - Mod. F285.P.60

Mod. F285.P.60

Hydraulic puller fit to pull one rope in laying underground transmission cables and fibre optics wires. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.

Machine control panel with control instruments.

Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.

Safety negative hydraulic brake.

Chassis with two dumped axles (tandem), tires, overrun brake, manual brake and drawbar for towing in the yard.

Metallic coverage with doors.

Mechanical stabilisers on pull side and jack-arm with wheel on drawbar side.

Attachments for anchorage and for lifting.

Heat exchanger to cool the oil in the hydraulic circuit.

Pulley for rope predisposed for telescopic rod.

Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 006.4 Arrangement of the chassis for circulation on road (homologation excluded).
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067.1 Telescopic rod for underground operations (art. F276).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 074.2 Steel rope.
  • 082 - Device for setting the pull force, which allows to maintain the force set even at speed '0' (fit for pipe refurbishing).
  • 127.2 Reinforced negative brake for using the machine in lifting operations.

 

 

Hydraulic puller - OMAC - Mod. F285.P.80

Mod. F285.P.80

Hydraulic puller fit to pull one rope in laying underground transmission cables and phone cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with two dumped axles (tandem), tires, overrun brake, manual brake and drawbar for towing in the yard.
  • Metallic coverage with doors.
  • Mechanical stabilisers on pull side and jack-arm with wheel on drawbar side.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 006.4 Arrangement of the chassis for circulation on road (homologation excluded).
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067.1 Telescopic rod for underground operations (art. F276).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 074.2 Steel rope.
  • 082 - Device for setting the pull force, which allows to maintain the force set even at speed '0' (fit for pipe refurbishing).
  • 127.2 Reinforced negative brake for using the machine in lifting operations.

 

 

Hydraulic puller - OMAC - Mod. F280.P.100

Mod. F280.P.100

Hydraulic puller fit to pull one rope in laying underground transmission cables and phone cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with two dumped axles (tandem), tires, overrun brake, manual brake and drawbar for towing in the yard.
  • Metallic coverage with doors.
  • Mechanical stabilisers on pull side and jack-arm with wheel on drawbar side.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 006.4 Arrangement of the chassis for circulation on road (homologation excluded).
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067.1 Telescopic rod for underground operations (art. F276).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 074.2 Steel rope.
  • 082 - Device for setting the pull force, which allows to maintain the force set even at speed '0' (fit for pipe refurbishing).

 

 

Hydraulic puller - OMAC - Mod. F280.P.150

Mod. F280.P.150

Hydraulic puller fit to pull one rope in laying underground transmission cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with two dumped axles (tandem), tires, overrun brake, manual brake and drawbar for towing in the yard.
  • Metallic coverage with doors.
  • Mechanical stabilisers on pull side and jack-arm with wheel on drawbar side.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 006.4 Arrangement of the chassis for circulation on road (homologation excluded).
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067.1 Telescopic rod for underground operations (art. F276).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 074.2 Steel rope.
  • 082 - Device for setting the pull force, which allows to maintain the force set even at speed '0' (fit for pipe refurbishing).

 

 

Hydraulic puller - OMAC - Mod. F290.P.200

Mod. F290.P.200

Hydraulic puller fit to pull one rope in laying underground transmission cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force. Safety negative hydraulic brake.
  • Chassis with two rigid axles (tandem), tires and drawbar for towing at low speed in workplace.
  • Metallic coverage with doors.
  • Mechanical stabilisers on pull side and jack-arm with wheel on drawbar side.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 006.3 Pneumatic braking system and ABS.
  • 006.4 Arrangement of the chassis for circulation on road (homologation excluded).
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067.1 Telescopic rod for underground operations (art. F276).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 074.2 Steel rope.
  • 082 - Device for setting the pull force, which allows to maintain the force set even at speed '0' (fit for pipe refurbishing).

 

 

Hydraulic puller - OMAC - Mod. F290.P.250

Mod. F290.P.250

Hydraulic puller fit to pull one rope in laying underground transmission cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with two rigid axles (tandem), tires and drawbar for towing at low speed in workplace.
  • Metallic coverage with doors.
  • Mechanical front and back stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 006.3 Pneumatic braking system and ABS.
  • 006.4 Arrangement of the chassis for circulation on road (homologation excluded).
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067.1 Telescopic rod for underground operations (art. F276).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 074.2 Steel rope.
  • 082 - Device for setting the pull force, which allows to maintain the force set even at speed '0' (fit for pipe refurbishing).

 

 

Hydraulic puller - OMAC - Mod. F260.P.400

Mod. F260.P.400

Hydraulic puller fit to pull one rope in laying underground transmission cables and pipe refurbishing works. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with two rigid axles (tandem), tires and drawbar for towing at low speed in workplace.
  • Metallic coverage with doors. Mechanical front and back stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 006.3 Pneumatic braking system and ABS.
  • 006.4 Arrangement of the chassis for circulation on road (homologation excluded).
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable. 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067.1 Telescopic rod for underground operations (art. F276).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 074.2 Steel rope.
  • 082 - Device for setting the pull force, which allows to maintain the force set even at speed '0' (fit for pipe refurbishing).

 

 

Hydraulic puller - OMAC - Mod. F260.P.600

Mod. F260.P.600

Hydraulic puller fit to pull one rope in laying underground transmission cables and pipe refurbishing works. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multi-grooved steel capstans fit for stringing one steel rope, with anti-fleeting rollers.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with two rigid axles (tandem), tires and drawbar for towing at low speed in workplace.
  • Metallic coverage with doors.
  • Hydraulic back stabilisers and manual front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

Optional devices:

  • 006.3 Pneumatic braking system and ABS.
  • 006.4 Arrangement of the chassis for circulation on road (homologation excluded).
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 074.2 Steel rope.
  • 082 - Device for setting the pull force, which allows to maintain the force set even at speed '0' (fit for pipe refurbishing).

 

 

Hydraulic puller - OMAC - Mod. F420.100.C

Mod. F420.100.C

Cable recovery winch designed to remove old or redundant armored telephone cables of up to 80 mm in diameter, mainly for duct reclamation allowing installation of fibre optic cables, but also for recovering old cables for recycling.

The winch is driven by a diesel hydraulic power-pack which is totally enclosed within a coverage thereby limiting noise emission. This in turn powers the main drive capstan head and back-tension mangle rollers.

On demand (opt.011.4) a separate hydraulic system can be installed for driving auxiliary equipment: hydraulic cutter, submersible hydraulic pump, and the boom positioning ram. The machine is mounted on damped trailer and it is complete with stabilizing jacks.

  • Diesel engine, water cooled, electric starting with 12 V battery.
  • Large-groove steel capstan, with anti-slipping.
  • Command panel with instruments for controlling the hydraulic circuit and the diesel engine.
  • Dynamometer for checking pulling values.
  • Preselector of maximum wanted pull force to stop the puller in case of overpull.
  • Hydrostatic circuit that allows to vary in continue way the speed of the capstan in both sense of rotation operating only one command.
  • Hydraulic emergency negative brake auto-operating in central position of command lever or in case of hydraulic breakdown (not fit for lifting).
  • Chassis with dumped axle, tires, overrun brake, manual brake and drawbar for towing in the yard.
  • Metallic coverage with doors.
  • Mechanical front and back stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic

Optional devices:

  • 005.2 Tandem axle with torsion bar suspensions, overrun braking system and lights (homologation excluded),
  • 006.4 Arrangement of the chassis for circulation on road (homologation excluded).
  • 011.4 Arrangement of an auxiliary hydraulic circuit, capacity 25 l/min, pressure 200 bar, with 3 outputs for feeding a hydraulic cutter, a water pump and a hydraulic cylinder for the boom.
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 044 - Mechanical metercounter for measuring the recovered cables length.
  • 067 - Telescopic rod to lay underground cables (art. F277).
  • 068.3 Support with chain-hoist for lifting and lowering the boom.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.

 

 

Hydraulic puller - OMAC - Mod. F380.20.P

Mod. F380.20.P

Hydraulic puller fit to pull one rope in laying underground transmission cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Stabilisers and attachments for anchorage.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Reelwinder fit for reels dia. 1100 mm, with automatic ropewinder.

Optional devices:

  • 007 - Chassis with damped axle, overrun brake and drawbar for towing on road (homologation excluded).
  • 026 - PVC cloth cover.
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067 - Telescopic rod to lay underground cables (art. F277).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.

 

 

Hydraulic puller - OMAC - Mod. F275.30.P

Mod. F275.30.P

Hydraulic puller fit to pull one rope in laying underground transmission cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Mechanical front and back stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 007 - Chassis with damped axle, overrun brake and drawbar for towing on road (homologation excluded).
  • 026 - PVC cloth cover.
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067 - Telescopic rod to lay underground cables (art. F277).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.

 

 

Hydraulic puller - OMAC - Mod. F280.40.P

Mod. F280.40.P

Hydraulic puller fit to pull one rope in laying underground transmission cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Mechanical front and back stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 007 - Chassis with damped axle, overrun brake and drawbar for towing on road (homologation excluded).
  • 026 - PVC cloth cover.
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 067 - Telescopic rod to lay underground cables (art. F277).
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.

 

 

Hydraulic puller - OMAC - Mod. F230.60.P

Mod. F230.60.P

Hydraulic puller fit to pull one rope in laying underground transmission cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Hydraulic back stabilisers and manual front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 007 - Chassis with damped axle, overrun brake and drawbar for towing on road (homologation excluded).
  • 026 - PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 047 - Hydraulic front stabilisers.
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.

 

 

Hydraulic puller - OMAC - Mod. F235.100.P

Mod. F235.100.P

Hydraulic puller fit to pull one rope in laying underground transmission cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Hydraulic back stabilisers and manual front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 008 - Axle with leaf spring suspensions, drawbar, pneumatic braking system, tyres and lights for towing on the road at 60 km/h (homologation excluded).
  • 026 - PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 047 - Hydraulic front stabilisers.
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-controlfor caterpillars.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 084 - Bigger reelwinder fit for a 1800-mm-dia reel.

 

 

Hydraulic puller - OMAC - Mod. F235.90.P

Mod. F235.90.P

Hydraulic puller fit to pull one rope in laying underground transmission cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Hydraulic back stabilisers and manual front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 008 - Axle with leaf spring suspensions, drawbar, pneumatic braking system, tyres and lights for towing on the road at 60 km/h (homologation excluded).
  • 026 - PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 047 - Hydraulic front stabilisers.
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 084 - Bigger reelwinder fit for a 1800-mm-dia reel.

 

 

Hydraulic puller - OMAC - Mod. F260.160.P

Mod. F260.160.P

Hydraulic puller fit to pull one rope in laying underground transmission cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved high resistance steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Hydraulic back stabilisers and manual front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 006 - Lights and pneumatic brake system for towing on the road at max 30 km/h max.
  • 008 - Axle with leaf spring suspensions, drawbar, pneumatic braking system, tyres and lights for towing on the road at 60 km/h (homologation excluded).
  • 026 - PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 047 - Hydraulic front stabilisers.
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.

 

 

Hydraulic puller - OMAC - Mod. F260.200.P

Mod. F260.200.P

Hydraulic puller fit to pull one rope in laying underground transmission cables. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

  • One pair of multigrooved high resistance steel capstans fit for stringing one steel rope.
  • Machine control panel with control instruments.
  • Electronic device operating as dynamometer, meter-counter, speedometer and preselector of max pull force.
  • Safety negative hydraulic brake.
  • Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
  • Hydraulic back stabilisers and manual front stabilisers.
  • Attachments for anchorage and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope predisposed for telescopic rod.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.

Optional devices:

  • 006 - Lights and pneumatic brake system for towing on the road at max 30 km/h max.
  • 008 - Axle with leaf spring suspensions, drawbar, pneumatic braking system, tyres and lights for towing on the road at 60 km/h (homologation excluded).
  • 026 - PVC cloth cover.
  • 028.7 Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
  • 037 - Remote control by cable, with 10 m of cable.
  • 038 - Radio-control (max distance 50 m).
  • 047 - Hydraulic front stabilisers.
  • 051.3 Motorised rubber caterpillars.
  • 038.C Radio-control for caterpillars.
  • 069.2 Electronic device with USB port, to save the data of the pull.
  • 069.5 Printer with accessories.
  • 084 - Bigger reelwinder fit for a 1800-mm-dia reel.

 

 

Electronic instrument for governing the puller

Electronic digital instrument for governing the machine. Fit for pullers, tensioners and puller-tensioners OMAC. Two versions available: DEG-V and DEG-M DEG-V displays in real time the pull force, the speed and length of cable. Also, it permits to set a max pull-force limit. DEG-M , other than the DEG-V functions, it permits to store the data monitored, and to copy them to a USB memory stick for transfer them to a personal computer.

  • Big-dimension keys.
  • Instrument dimensions: 19 x 9,5 cm
  • Multi-row display (8 rows x 24 chars) with big dimensions (100 x 37 mm) and back-light for good readability.
  • Electric feeding supplied by the machine.
  • Safe battery with 5 years of life.
Functions of both versions DEG-V and DEG-M
  • Monitoring and visualization of the pull force, speed and length of cable.
  • Max pull alarm setting.
  • Hour and date.
  • Easy setting.
Functions of version DEG-M only
  • High-capacity internal memory: up to 240.000 samples, that is about 200 km of line stringed.
  • Automatic restart in case of temporary stop.
  • Data managing: the stored data can be displayed, saved on a USB memory stick, and deleted.

Optional DEG-VAL

The instrument DEG-M can also be equipped with a portable thermal printer for printing the stored data. The printer is supplied with cable for connection to the plug on the puller, 3 reels of paper, and an aluminium case 37x25x10 cm for transport.

 

 

Electronic device for governing machines - OMAC