Hoist lifting system

Lifting system - Lifting hoists Gattegno

Electric chain hoist

Single phase range from 50 to 1000 kg. The single phase electric hoists allow a quick and east use of the hoists for a large range of capacities from 500 to 1000 kg. They are perfectly adapted for onsite or modular design situations. Easy to transport, they adapt to all your needs. By selecting your device according to the FEM class.

Electric chain hoist - gattegno argenteuil

Characteristics

  • Solid aluminum housing that protects it from external aggressions.
  • Standard electrical up and down limit (from 250 kg) increasing the hoist’s lifetime and safety of use
  • FEM Classification : 2 m to 1 Bm – 2 years warranty
  • Emergency stop button on the operating panel for increased security (hoist power interruption)
  • 48 V Standard security low voltage control, IP54
  • Torque limiter for overload protection
  • Standard thermal motor protection
  • Compact dimensions ideal for constricted spaces
  • The permanent lubrication of the reducer allows silent operation
  • The electromagnetic brake keeps the load in total security
  • Galvanized Load chain
  • 3 m Standard lift path

Options

  • Suspension hook turned 90° (in the hoist axis from 250 kg)
  • Trolleys on request (for electric trolley = 0,18 kW)
  • Also available in 110V mono 50 Hz (period on request)

Other models on request(Capacity up to 10T, hoisting speed, etc..)

Model Cap.(kg) Number of legs Core Main pulling speed m/min Chain dimension (mm) Class. FEM Wheight (kg) Motor power(kW)
CPMono 0.5-4 50 1 SH 4 4 x 12.2 4m 11,5 0,1
CPMono 0.8-4 80 1 SH 4 4 x 12.2 4m 11,5 0,1
CPMono 1-4 100 1 SH 4 4 x 12.2 3m 11,5 0,1
CPMono 1.2-4 125 1 SH 4 4 x 12.2 2m 11,5 0,1
CPMono 2-8 250 1 V 8 4 x 12.2 1Bm 24 0,37
CPMono 5-4 500 2 VV 4 4 x 12.2 1Bm 25 0,37
CPMono 5-8 500 1 G 8 5 x 15.1 1Bm 26 1
CPMono 10-4 1000 2 GG 4 5 x 15.1 1Bm 28 1

 

Manual chain hoist

VSIII hoist - Capacity 500 to 5000 kg

manual chain hoists- pulling accessories

Characteristics

  • Chain sprocket mounted on bearings
  • Bichromate treated internal mechanics for higher resistance to corrosion
  • Entirely enclosed mechanical break, protecting the hoist against dust and external particles. This allows wider opening on the hood for the maneuver chain pulling. The break system is entirely integrated to the housing.
  • Large surface friction discs for a better heat dissipation making it more durable.
  • Forged steel hooks: They open in case of overload, but don’t break. They are rotating at 360°.
  • The very robust forged steel security retaining latches is mounted on a perfectly encased spring, so that it does not get snagged.
  • Double security ratchet with counter spring, protected against risk of snagging.
  • The loading chain is treated anti corrosion.
  • Open chain sprocket facilitating particles evacuation and avoiding chain drops.
Model Capacity (kg) Number of legs Chain dimensions dxp (mm) Tension on manoeuver chain (daN) Load displacement for 1 m of maneuver chain (mm) Wheight for standard course 3 m (kg)
VSIII 500 500 1 5x15 21 26 9
VSIII 1T 1000 1 6x18 24 24 11,5
VSIII 2T1B 2000 1 8x24 32 19 19
VSIII 2T2B 2000 2 6x18 29 15 17,3
VSIII 3T1B 3000 1 10x30 40 12 31
VSIII 3T2B 3000 2 8x24 37 10 27
VSIII 5T 5000 2 10x30 41 8 43

 

Hoist lever

Ratchet hoist lever Pul-Lift C/D85

D85 link chain model – C85 roller chain model from 750 to 1000 kg

Ratchet hoist lever - Pulling accessories Gattegno

 

Extremely impact resistant, the Ratchet hoist lever Pul-Lift C/D85 is designed to go through the most difficult conditions and works. The core, the casing and the lever are made of conformal white cast iron, which makes them very solid. A wheel enables an easy approach of the empty chain. The Pul-Lift is ideal for lifting, moving or stowing heavy weights.It is also used to apply traction on high voltage cables or ski-lifts. Standard course: 1.5 m. The real conformal cast iron Pul-Lift, manufactured since 1963. The most resistant hoist lever.

Options

  • Torque limiter (for the limitation of the lifting load)
  • Chain length on demand
Model Capacity kg Leg number Tension on the lever at nominal charge daN Wheight for standard course (1,5 m) en kg
D85 750 KG STD 750 1 38 8.2
D85 1500 KG STD 1500 1 31 16.3
D85 3000 KG STD 3000 1 40 19.6
D85 6000 KG STD 6000 2 42 32.9
D85 10000 KG STD 10000 3 37 60
C85 750 KG STD 750 1 38 8.7
C85 1500 KG STD 1500 1 31 17
C85 3000 KG STD 3000 1 40 22.2
C85 6000 KG STD 6000 2 44 38
C85 10000 KG STD 10000 3 44 67

 

Hoist lever - UNO Plus Model from 750 to 6000 kg

Conceived for lifting and pulling loads, its low weight and free wheel system make it very easy to handle. This equipment is perfect for maintenance work and punctual use (1.5m standard chain course). The UNO is available in ATEX version, for 4 capacities, with identical dimensions and technical characteristics. Equipped with a copper hook.

Hoist lever for punctual use - Lifting accessories
Model A mm B mm C mm D mm E mm F mm G mm H mm J mm K mm L mm
UNOplus 750 340 22 26 16 250 150 70 80 150 60 90
UNOplus 1500 410 28 32 21 330 170 80 90 180 80 100
UNOplus 3000 510 36 40 27 380 220 100 120 210 90 120
UNOplus 6000 690 45 44 33 380 220 100 120 210 90 120

 

  • Steel sheet core and lever.
  • Low weight.
  • Free wheel enabling a quick approach of the load.
  • Epoxy paint.
  • Hook with safety latch.
  • Galvanized link chain corresponding to national and international.
  • Very short operating lever with ergonomic handle in accordance with the EN 13157 standard.
Model Capacity kg Leg number Chain dimensions mm Movement by lever turn mm Lever stress daN Wheight for standard course kg
UNOplus 750 750 1 6x18 20 20 7,2
UNOplus 1500 1500 1 8x24 22 35 12,5
UNOplus 3000 3000 1 10x30 17 40 21,5
UNOplus 6000 6000 2 10x30 9 40 32

 

Manual trolleys HTP and HTG

Manual range from 500 to 20 000 kg

  • HTP model: Push type
  • HTG model: Geared type

The trolley enables the exact positioning or easy traversing of large loads with either manual or powered hoisting equipment. Adjustable to fit a wide range of beam widths and profiles (e.g. INP, IPE and IPB). Adjustments are made by rotating the clevis load bar which also ensures the centered positioning of the hoist in the clevis - no creeping to the left or the right. The trolley wheels are designed for a max. beam profile incline of 14%. Possibility to add a hand chain from stainless steel on the HTG Dacromet model (option). Every trolley model HTP/G is factory tested with overload. The units are supplied with a test certificate showing the unit's serial number & an operating instructions manual, which contains an EC declaration of conformity.

HTP and HTG manual trolleys are also available in ATEX version which corresponds to HTP HTG manual trolleys in anti-corrosion version. This version is adapted for corrosive environment. To meet the CE 94/9/E standard and be used in explosive environment, the http HTG ATEX trolleys have bronze wheels for a better heat diffusion. Yale manual pulleys are easy, quick and safe to assemble thanks to their threaded central eye axis and no tools are required.

Options

  • Trolleys equipped with rubber buffers
  • Locking device to secure the trolley in position on the beam (park position e.g. on ships)
  • Anti-corrosion version CR Dacromet : specially adapted to work in corrosive environments
  • Possibility to add a hand chain from stainless steel on the HTG Dacromet model.

HTP model : Push type

 Manual pulley HTP model : push type

 

Model Capacity kg Height Beam flange width mm Min. bending radius m Manual effort for nominal load daN Wheight for HTTP Lost height (mm)
HTP A 250/500 KG 500 A 50-220 0.90 3 8.0 77
HTP B 250/500 KG 500 B 160-300 0.90 3 10.6 92
HTP A 1000 KG 1000 A 58-220 0.90 6 9.0 82.5
HTP B 1000 KG 1000 B 160-300 0.90 6 12.0 97.5
HTP A 1500/2000 KG 2000 A 66-220 1.15 7 16.0 98.5
HTP B 1500/2000 KG 2000 B 160-300 1.15 7 19.3 113.5
HTP A 3000 KG 3000 A 74-220 1.40 7 32.0 114
HTP B 3000 KG 3000 B 160-300 1.40 7 35.8 129
HTP A 5000 KG 5000 A 90-220 1.80 9 48.0 132.5
HTP B 5000 KG 5000 B 180-300 1.80 9 52.2 147.5

 

HTG Model: Geared type

 

 Manual pulley model HTG : geared type - gattegno

 

Model Capacity kg Height Beam flange width mm Min. bending radius m Manual effort for nominal load daN Wheight for HTTP Lost height (mm)
HTG A 250/500 KG 500 A 50-220 0.90 3 9.7 77
HTG B 250/500 KG 500 B 160-300 0.90 3 12.6 92
HTG A 1000 KG 1000 A 58-220 0.90 6 11.2 82.5
HTG B 1000 KG 1000 B 160-300 0.90 6 14.1 97.5
HTG A 1500/2000 KG 2000 A 66-220 1.15 7 18.0 98.5
HTG B 1500/2000 KG 2000 B 160-300 1.15 7 21.3 113.5
HTG A 3000 KG 3000 A 74-220 1.40 7 35.4 114
HTG B 3000 KG 3000 B 160-300 1.40 7 39.2 129
HTG A 5000 KG 5000 A 90-220 1.80 9 51.8 132.5
HTG B 5000 KG 5000 B 180-300 1.80 9 56.0 147.5
HTG B 8000 KG 8000 B 125-310 1.80 14 104.0 276
HTG B 10000 KG 10000 B 125-310 1.80 14 104.0 276
HTG B 15000 KG 15000 B 125-310 5.00 29 230.0 270
HTG B 20000 KG 20000 B 125-310 5.00 29 230.0 270